Fowler 52-562-999 Test Indicator Kit with Universal Holder 0.030" Maximum Mea...

Description

Fowler 52-562-999 Test Indicator Kit with Universal Holder, 0.030" Maximum Measuring Range, 0.0005" Graduation Interval, 1.125" Diameter, with Certificate of Calibration
Fowler horizontal dial test indicator with black face and jeweled bearings is designed to measure surface variations in narrow or recessed areas in fractions of an inch
1.125" diameter balanced dial has 0-15-0 dial reading, 0.030" measuring range, and 0.0005" graduations for measuring from a specific reference point
Two carbide points 0.400" long with 0.040" and 0.080" point diameters swivel 210 degrees to reach any location
Horizontal face and three universal dovetail mounts includes two dovetail clamping stems for mounting vertically or horizontally from the top, front, or back of the indicator
Includes Certificate of Calibration, 0.080" point, 0.040" point, universal clamp, height gage attachment, 3/8" dovetail clamp, 1/4" dovetail clamp, and a fitted case
The Fowler 52-562-999 horizontal test indicator has a 1.125" diameter black face balanced dial, a 0.030" measuring range, 0.0005" graduations, two carbide points, and jeweled bearings, and is designed to measure surface variations in narrow or recessed areas. The black face has a contrasting hand to make measurements easy to read. The 0-15-0 balanced dial has a total measuring range of 0.030" with 0.0005" graduations. The auto-reverse mechanism and jeweled bearings provide accurate measurements. Two interchangeable carbide contacts points 0.40" long have 0.040" and 0.080" ball diameters for use on a range of surfaces. Carbide points provide durability for surfaces with a hardness rating below that of carbide. Three separate dovetail mounts allow the indicator to be mounted from the top, front, and back of the indicator and two dovetail clamping stems 3/8" and 1/4" in diameter provide a range of clamping options. The set includes a horizontal-face dial test indicator, a Certificate of Calibration, one 0.080" point, one 0.040" point, a universal clamp, a height gage attachment, a 3/8" dovetail clamp, a 1/4" dovetail clamp, and a fitted case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Specifications Dial face type and diameter 1.125" diameter horizontal face Dial type and reading Balanced 0-15-0 dial with black face Range and graduations 0.030" range with 0.0005" graduations Mechanism Auto-reverse mechanism with jeweled bearings point construction Carbide point point length 0.40" point diameter 0.040", 0.080" Mounting type Dovetail mount on top, front, and back Dovetail stem diameters 3/8" and 1/4" Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as small variations in flatness or height of an inspected workpiece, and permit measurement in narrow grooves or small bores. A test indicator gauge consists of a ball-tipped point on a levered arm, also called a measuring insert, which pivots from a hinge point. The reading indicates the degree of angular displacement of the arm. Test indicator gauges are commonly used in manufacturing, machining, and mechanical engineering. Standard test indicators measure the displacement of the arm perpendicular to the axis of the indicator. Dial and electronic indicators are very similar to test indicators, except that the axis of measurement is parallel to the axis of the indicator. Test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA. What’s in the Box? Fowler horizontal dial test indicator Certificate of Calibration Dovetail clamping stems (3/8" and 1/4" diameter) Carbide points (0.40" and 0.80") Fitted storage case
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.