Stormer Viscometer Viscosity Meter Paint Coating Ink Temp KU CP G MPa.s Display

Description

Stormer Viscometer Viscosity Meter Paint Coating Ink Temp Display KU CP G MPa.s
One. Summary
The stom viscometer is used for the determination of paint and other KU indicating the viscosity of the coating. The instrument can display the KU value of the measured sample viscosity or the load value associated with the KU value (unit: G).
Two. Specification
1. measurement range: 40.2 ~ 141.0KU (KU value), 27cP-5250cP 32 ~ 1099g (load value);
2. measurement accuracy: 1.50% of full range;
3. measurement repeatability: the full range of 1.50%;
4. the rotational speed of the mixing axis: 200r/min + 1r/min;
5. container capacity: About 500ml;
6. input voltage: 220V 50Hz;
7. power: 10W;
8. shape size: 210mm x 180mm x 500mm (long * width *);
9. weight: 10kg.
Three. Experimental environment
1. the instrument should be placed on a strong and smooth surface away from strong airflow, strong magnetic field, strong electric field and strong electric pulse interference.
2. in order to ensure the safety of the operator, the power outlet in the laboratory should be grounded reliably.
3. the temperature in the laboratory should be 23 C + 2 C, and the relative humidity should be less than 75%.
4. sample should be 23 + 0.2 C.
Four. Operation and use
1. remove the instrument from the packaging box and put it on the worktable.
2. remove the stirring blade from the packing box, insert it into the sleeve of the rotating shaft, and fix it with the top tightening screw.
3. plug in the power plug, open the power switch on the back, the system starts to self check, the system will enter the standby state after the completion of the self test, and the display will display "-".
4. put the tested sample in the container which the instrument comes from, the liquid level is about 10mm from the container port.