TA Instruments AR2000ex Rheometer 531002.901, no Controller & Power Supply (6276

Description

TA Instruments AR2000ex Rheometer 531002.901 Without Power Supply Etc.. (6276) w
We do NOT have a power supply for this unit therefore we cannot power up the device, no cables or other options are included with your purchase, see images for full details.
Manufacturer: TA Instruments
Model # Model: 531002.901
AR2000ex Rheometer
Description: Used AR2000ex Rheometer that we are unable to test becuase we do not have the power supply. Only the AR2000ex is included with your purchase. It appears to have been lightly used with only some cosmetic wear to the device.See images for full description.
The AR 2000ex brings an all new electronics package to the time-tested hardware of the world’s best selling rheometer, further extending the long list of unique features. The AR 2000ex rheometer design includes a unique, ultra-low inertia drag cup motor and porous carbon air bearings for outstanding controlled stress, direct strain and controlled rate performance. The AR 2000ex features the original Smart SwapTM quick interchanging and self-configuring environmental systems. Enhanced features of the AR 2000ex include the new ETC with fast heating rates, ETC and Peltier Camera Viewers (with image capture software), a new Electrically Heated Plate Temperature System, and ethernet communications. The AR 2000ex is extremely versatile and appropriate for a wide variety of applications including fluids of any viscosity, polymer melts, solids and reactive materials
.
(Taken from
manufacturer
website).
Defects: Unable to test, Slight paint chipping (see images)
Specifications:
​Preventive Maintenance done on 28/Feb/2017
Qualification 28/Feb/2017
​
Note*:
The Specifications listed below are form the manufacturer and this device is NOT tested to any of these specs.
​
Minimum Torque Oscillation CR: 0.03 µN.m
Minimum Torque Oscillation CS: 0.1 µN.m
Minimum Torque Steady CR: 0.05 µN.m
Minimum Torque Steady CS: 0.1 µN.m
Maximum Torque: 200 mN.m
Torque Resolution: 1 nN.m[1]
Motor Inertia: 15 µN.m.s
Angular Velocity Range CS: 0 to 300 rad/s
Angular Velocity Range CR: 1E-8 to 300 rad/s
Frequency Range: 7.5E-7 to 628 rad/s
Displacement Resolution: 40 nrad
Step Change in Velocity: 25 ms
Step Change in Strain: 60 ms
Direct Strain Control: Standard [3]
Thrust Bearing: Porous Carbon Air
Normal/Axial Force Range: 0.005 to 50 N
Smart Swap™: Standard
Peltier Plate: -40 to 200 °C [4]
Environmental Test Chamber (ETC): -160 to 600 °C
Concentric Cylinder: -20 to 150 °C (4)
Peltier Control
Upper Heated Plate: -30 to 150 °C (4)
Electrically Heated Plate: (EHP) -80 to 400 °C
Dimensions: (actual) 12" x 12" x 27"
​Shipping Dimensions:)  18" x 18" x 36"
Weight: (actual) 61 lbs
​Shipping Weight: 70lbs
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Get images that
make Supersized seem small.
THE simple solution for eBay sellers.
Track Page Views With
Auctiva's FREE Counter